Volkswagen Workshop Service and Repair Manuals

• ‒ Switch on ignition.
• ‒ Set the seat.
• ‒ Set both exterior mirrors.

• ‒ → Now press one of the memory buttons (1...3) and hold it depressed for about 3 seconds until an acoustic signal confirms that the settings are stored in the memory.

The settings are now stored on the selected memory button.

The stored settings can be recalled via the memory buttons (1...3) as well as via the radio wave remote control.

Allocating a seat adjustment to a radio wave remote control key is described at the end.

Notes:

• ◆ When the vehicle battery is disconnected all the data stored for the seat and mirror settings are lost.
• ◆ For future versions of the control unit this data will be retained even when the battery is disconnected.
• ◆ Each time settings are stored on a button the previous data will be erased.