Golf Mk4
Removing and installing lock carrier with attachments |
1 - | Lock carrier with attachments |
q | Removing: |
– | Disconnect cable → Item on lock and separate electrical connections. |
– | Separate connections on headlight housings. |
– | Remove front bumper and bumper carrier → Chapter. |
– | Disconnect hose for headlight washer system at T-piece. |
– | Unbolt radiator and condenser from lock carrier. |
– | Secure radiator and condenser in engine compartment → Heating, air conditioner; Rep. Gr.87. |
Note
t | Do not hang condenser up on pipes/hoses. |
t | Do not kink condenser pipes/hoses. |
q | Installing: |
– | Align lock carrier to longitudinal members and between wings. |
Body gaps/shut lines → Rep. Gr.00 |
– | Readjust headlights. |
2 - | Bolt |
q | Qty. 2 |
q | 8 Nm |
3 - | Bowden cable |
4 - | Hole in side panel |
5 - | Radiator and condenser |
6 - | Bolt |
q | Qty. 4 |
q | 8 Nm |
7 - | Bumper carrier |
8 - | Bolt |
q | Qty. 4 |
q | 20 Nm |
9 - | Guide pins -3411- |