Golf Mk4
| Assembly overview - bumper carrier |
Note| The removal and installation procedures may have to be modified slightly depending on variations in equipment. |
| 1 - | Bumper carrier |
| 2 - | Bolt |
| q | Qty. 4 |
| q | 1.5 Nm |
| 3 - | Securing strip |
| 4 - | Guide element |
| q | To remove and install, pull out/push in bumper cover parallel to guide elements (left and right) |
| 5 - | Bolt |
| q | Qty. 5 |
| q | 1.5 Nm |
| 6 - | Spreader nut |
| q | Qty. 5 |
| 7 - | Pop rivet nut |
| q | Qty. 2 |
| 8 - | Spreader nut |
| q | Qty. 4 |
| 9 - | Bolt |
| q | Qty. 2 |
| q | 6.6 Nm |
| 10 - | Bolt |
| q | Qty. 4 |
| q | 20 Nm |
