Golf Mk4
| Assembly overview |
| The door hinge bolts must always be replaced if loosened. |
| 1 - | Door |
| q | Removing and installing → Chapter |
| 2 - | Door handle with backing plate |
| q | Removing and installing → Chapter |
| 3 - | Housing |
| q | Removing → Chapter |
| 4 - | Bolt |
| q | 20 Nm |
| 5 - | Cap |
| 6 - | Locking button |
| q | Removing and installing → Chapter |
| 7 - | Locking rod |
| 8 - | Relay lever |
| 9 - | Locking rod |
| 10 - | Bolt |
| q | 20 Nm |
| 11 - | Lock plate |
| 12 - | Door lock |
| q | Removing and installing → Chapter |
| 13 - | Bowden cable |
| 14 - | Interior release handle |
| 15 - | Multi-point socket head bolt |
| q | M8×28 |
| q | Remove only this bolt from hinge to remove door |
| q | 20 Nm + 1/4 turn (90°) further |
| q | Always renew after loosening |
| 16 - | Multi-point socket head bolt |
| q | M8×28 |
| q | Remove only this bolt from hinge to remove door |
| q | 20 Nm + 1/4 turn (90°) further |
| q | Always renew after loosening |
| 17 - | Door hinge with door arrester |
| q | Hinge is split |
| 18 - | Multi-point socket head bolt |
| q | M8×28 |
| q | Installed from inside vehicle |
| q | Removing B-pillar lower trim → General body repairs, interior; Rep. Gr.70 |
| q | 20 Nm + 1/4 turn (90°) further |
| q | Always renew bolts after loosening |
| 19 - | Multi-point socket head bolt |
| 20 - | Multi-point socket head bolt |
| q | M8×28 |
| q | 20 Nm + 1/4 turn (90°) further |
| q | Always renew bolts after loosening |
| 21 - | Cap |
| 22 - | Bolt |
| q | 13 Nm |
| 23 - | Door hinge |
| q | Hinge is split |
| 24 - | Multi-point socket head bolt |
| q | M8×22 |
| q | Installed from inside vehicle |
| q | Removing B-pillar lower trim → General body repairs, interior; Rep. Gr.70 |
| q | 20 Nm + 1/4 turn (90°) further |
| q | Always renew bolts after loosening |
| 25 - | Multi-point socket head bolt |
| q | M8×28 |
| q | 20 Nm + 1/4 turn (90°) further |
| q | Always renew bolts after loosening |
