Golf Mk4
| Assembly overview - rear outer seat belts |
| 1 - | Belt inertia reel |
| 2 - | Hexagon head bolt |
| q | 40 Nm |
| 3 - | Noise insulation |
| q | Fitted on belt inertia reel |
| 4 - | Belt height adjustment |
| q | To remove the belt height adjustment mechanism, the upper C-pillar trim must be removed first |
| 5 - | Socket head bolt |
| q | 23 Nm |
| 6 - | Belt relay fitting cover cap |
| 7 - | Hexagon head bolt |
| q | 40 Nm |
| 8 - | Belt relay |
| 9 - | Belt latch |
| 10 - | Lower belt end anchor |
| 11 - | Hexagon head bolt |
| q | 40 Nm |
