| –
| Disconnect speed sensor wiring connector -1- from speed sensor. |
| –
| Remove bolt -2- from wheel bearing housing. |
| –
| Pull ABS speed sensor out of wheel bearing housing. |
| –
| Before inserting speed sensor, clean inner surface of hole and coat speed sensor all-round with solid lubricant paste G 000 650. |
| –
| Insert speed sensor into hole in wheel bearing housing and tighten bolt to 8 Nm. |
| –
| Connect speed sensor to speed sensor wiring. |
| –
| Turn wheels fully onto left and right-hand lock and check clearance to speed sensor wiring. |
|
|
|
