Golf Mk4
| Dismantling and assembling oil filler bracket |
| 1 - | Plug, 40 Nm |
| q | Renew. |
| 2 - | Seal |
| q | Rolled attached to → Item. |
| 3 - | Spring |
| q | For pressure relief valve, approx. 4 bar. |
| 4 - | Piston |
| q | For pressure relief valve, approx. 4 bar. |
| 5 - | Gasket |
| q | Renew. |
| 6 - | Seal |
| q | Slide down to sealing cover collar → Item. |
| 7 - | Sealing cap |
| 8 - | Securing clip |
| 9 - | Plug, 15 Nm |
| 10 - | Seal |
| q | Cut off and renew seal if leaking. |
| 11 - | 1.4 bar oil pressure switch -F1-, 25 Nm |
| q | Black. |
| q | Check → Chapter. |
| 12 - | Seal |
| q | Cut off and renew seal if leaking. |
| 13 - | Oil filter bracket |
| q | With anti-drain valve pressed in. |
| 14 - | 15 Nm + 1/4 turn (90°) further |
| q | Renew. |
| 15 - | Seal |
| q | Renew. |
| q | Latch into lugs on oil cooler. |
| 16 - | Oil cooler |
| q | Apply sealing paste -AMV 188 100 02- to contact surfaces with oil filter bracket outside sealing ring. |
| q | Ensure clearance to adjacent components. |
| q | See note → Chapter. |
| 17 - | 25 Nm |
| 18 - | Oil filter |
| q | Loosen using securing strap or oil filter tool -3417-. |
| q | Tighten hand-tight. |
| q | Note installing instructions on oil filter. |