Golf Mk4
|
1 - | Clutch housing “K2/K3” |
q | Only the parts of the “K2” are shown here. |
q | The plates of “K3” are still installed. Removing and installing “K3” plates → Chapter. |
q | Dismantling and assembling clutch housing → Chapter. |
2 - | Outer plate |
3 - | Inner plate |
4 - | Last outer plate “pressure plate” |
q | Thicker than the other outer plates. |
5 - | Retaining ring |
q | Ring will not be renewed. Therefore, remove and install carefully, being careful not to over-stretch it. |