Golf Mk4
| Assembly overview - hydraulic system |
| 1 - | Brake fluid reservoir |
| 2 - | Supply hose |
| 3 - | Master cylinder |
| q | Removing and installing → Chapter |
| 4 - | Retainer |
| q | Renew only with master cylinder removed |
| q | Removing → Fig. |
| q | Pressing on → Fig. |
| 5 - | Clutch pedal |
| q | Removing and installing → Chapter |
| 6 - | Self-locking hexagon nut, 25 Nm |
| q | Always renew |
| 7 - | Retainer |
| q | Secured to body. |
| 8 - | Release lever |
| q | Removing and installing → Chapter |
| 9 - | Slave cylinder |
| 10 - | Flange bolt, 25 Nm |
| 11 - | Retainer |
| 12 - | Pipe/hose line |
| q | Allocate according to → Electronic parts catalogue “ETKA”. |
| 13 - | Push-on pipe connection |
| 14 - | Dust cap |
| 15 - | Bleeder valve |
| q | Bleeding clutch system → Chapter |
| 16 - | O-ring |
| q | Pull onto line connection |
| q | Insert with brake fluid. |
| 17 - | Clip |
| 18 - | Gearbox |
|
|
|
|
