volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Table of shims > < Adjusting output shaft for 1st through 4th gears

Golf Mk4

Determining thickness of shim
Determining thickness of shim
The specified bearing preload will be attained by subtracting the measured value (0.14 mm) from the inserted shim (1.70 mm) and adding a constant value for preload (0.20 mm).
Example:
   
Installed shim1.70 mm
- Measured value0.14 mm
+ Preload (constant)0.20 mm
Shim thickness1.76 mm

–  Determine thickness of shim according to table → Chapter.
–  Determine part number of shim according to → Electronic parts catalogue (ETKA).
   
–  Remove gearbox housing and pull tapered roller bearing outer race from gearbox housing.
A - Counter support, e.g. -Kukko 22/2-
B - Internal puller, 46…58 mm, e.g. -Kukko 21/7-
–  Remove inserted shim (1.70 mm thick) from gearbox housing.
  N35-0332

Table of shims > < Adjusting output shaft for 1st through 4th gears