Golf Mk4
|
| A - | Brake pedal switch -F47- |
| q | In footwell on brake pedal |
| B - | Brake light switch -F- |
| q | In footwell on brake pedal |
| C - | Accelerator pedal position sender -G79- |
| q | In footwell on accelerator pedal |
| D - | Clutch pedal switch -F36- |
| q | In footwell on clutch pedal |
| 1 - | Exhaust gas recirculation valve (mechanical) |
| q | With intake manifold flap |
| 2 - | Change-over valve |
| q | On engine codes AJM, ATD, AUY for variable intake manifold flap changeover valve -N239- |
| q | On engine code AXR for exhaust gas recirculation cooler changeover valve -N345- |
| 3 - | Exhaust gas recirculation valve -N18- (electro-pneumatic) |
| 4 - | Diesel direct injection system control unit -J248- |
| q | With altitude sender -F96- |
| q | Renew → Chapter. |
| 5 - | Charge pressure control solenoid valve -N75- |
| 6 - | Coolant temperature sender -G62- |
| q | For engine control unit. |
| q | With coolant temperature gauge sender -G2-. |
| q | If necessary, release pressure in cooling system before removing. |
| 7 - | Air mass meter -G70- |
| 8 - | Connector |
| q | For (unit injector cyl. no. 1 -N240-…unit injector cyl. no. 4 -N243-) |
| 9 - | Engine speed sender -G28- |
| 10 - | Fuel temperature sender -G81- |
| 11 - | Connector |
| q | Engine speed sender -G28- |
| 12 - | Connector |
| q | For Hall sender -G40-, for camshaft position |
| 13 - | Hall sender -G40- |
| q | For camshaft position |
| 14 - | Intake manifold pressure sender -G71- with intake manifold temperature sender -G72- |
