Golf Mk4
Assembly overview - fuel filter |
1 - | Supply line |
q | From fuel tank. |
q | White or with white marking. |
q | Check for secure seating. |
2 - | Return line |
q | To fuel cooler |
q | Blue or with blue marking. |
q | Check for secure seating. |
3 - | O-ring |
q | Renew |
4 - | Control valve |
q | Installation position: arrow points towards fuel tank |
q | When changing filter, remove securing clip and take control valve off complete with fuel lines. |
q | Below +15 °C: passage to filter open. |
q | Over +31 °C: passage to filter closed. |
5 - | Securing clip |
q | Check for secure seating. |
6 - | Return line |
q | Check for secure seating. |
q | From tandem pump → Item |
7 - | Supply line |
q | Check for secure seating. |
q | To tandem pump → Item |
8 - | Fuel filter |
q | Fill with diesel before installing |
q | Direction of flow is marked by arrows |
q | Do not interchange connections |
q | Renew if damaged. |
9 - | Gasket |
q | Renew if damaged. |
10 - | Water drainage plug |
q | To bleed, remove control valve securing clip and take off control valve complete with fuel lines |
q | Loosen and allow approx. 100 cm3 fluid to drain |