Note t
| When installing an exchange cylinder head, all the contact surfaces between the support elements, roller rocker arms and the cams must be oiled before installing the camshaft housing. |
t
| The plastic protectors fitted to protect the open valves must be removed only immediately before the cylinder head is fitted. |
t
| If the cylinder head is replaced, all the coolant in the system must also be renewed. |
Removing, installing and tensioning toothed belt → Chapter. |
Checking semi-automatic toothed belt tensioner → Chapter |
Removing and installing camshaft housing → Chapter. |
Removing and installing cylinder head → Chapter. |
|
|
|