Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Safety precautions >
< Dismantling and assembling intake manifold lower part
Golf Mk4
Power unit
4cyl. Injection Engine, (2.0 ltr. Engine) (Mexico)
Mixture preparation system, electronic inj.,Gas / Servicing injection system
Dismantling and assembling air cleaner
4cyl. Injection Engine, (2.0 ltr. Engine) (Mexico)
Servicing injection system
Dismantling and assembling air cleaner
Connector
◆
Black, 2-pin
◆
For heater element (N79)
◆
Check heater element voltage supply between contacts 1 and 2 with engine running
Specification: min. 11,5 V
Intake hose
◆
With crankcase heater element (N79)
Air mass meter (G70) with intake air temperature sender (G42)
Connector
◆
Black, 5-pin
◆
Gold plated contacts
Seal
◆
Renew if damaged
Air cleaner upper part
Air duct
◆
Clipped into air cleaner upper part
6 Nm
Filter element
Air cleaner lower part
Air duct
10 Nm
O-ring
◆
Renew if damaged
Intake hose
◆
Check seated securely
◆
Press together at front to release
◆
To secondary air pump motor (V101) , item 6.
Connecting hose
◆
From the connecting pipe on intake manifold upper part (=> Page
24-14
, item 11) to the intake hose
Connecting hose
◆
To air pipe for air shrouded injectors=> Page
24-15
, item 6
Connecting hose
◆
For crankcase breather hose => Page
15-2
, item 6
◆
From breather housing on cylinder head cover or intake manifold upper part
◆
Do not separate from intake hose -item
2
-
To throttle valve control part (J338)
Power unit
4cyl. Injection Engine, (2.0 ltr. Engine) (Mexico)
Mixture preparation system, electronic inj.,Gas / Servicing injection system
Dismantling and assembling air cleaner
Safety precautions >
< Dismantling and assembling intake manifold lower part