Golf Mk4
| Assembly overview - oil filter housing |
| 1 - | 1.4 bar oil pressure switch -F1-, 20 Nm |
| q | Black |
| q | If seal is leaking, nip open and renew. |
| q | Checking → Chapter |
| 2 - | Oil filter housing |
| q | With non-return valve. |
| q | Opening pressure: 0.05 bar |
| 3 - | O-ring |
| q | Renew. |
| q | Lubricate before installing. |
| 4 - | Oil cooler |
| q | Ensure clearance to adjacent components. |
| q | Coat contact area outside the seal with AMV 188 001 02 |
| q | See note → Chapter. |
| q | Coolant hose schematic diagram → Chapter. |
| 5 - | Seal |
| q | Renew. |
| q | Lubricate before installing. |
| 6 - | Oil cooler cover, 25 Nm |
| 7 - | O-ring |
| q | Insert in oil cooler before installing → Fig. |
| q | Renew. |
| q | Lubricate before installing. |
| 8 - | 23 Nm |
| 9 - | Oil filter element |
| q | Observe change intervals. |
| q | See note → Chapter. |
| 10 - | Oil filter lower part, 25 Nm |
| q | Drain before removing. |
| q | With by-pass valve, opening pressure: 2.50 bar |
| 11 - | Oil drain plug, 10 Nm |
