These definitions refer only to the assembly group Running gear, axles, steering. These definitions are not necessarily generally valid. |
Abbreviation for Part Number. |
The steering angle sender detects the direction, left or right, and distance in which the steering wheel is turned. |
Data is transmitted to the control unit via the data bus lines. |
A spring steel spiral which is screwed into a threaded hole and in turn serves as inner thread for a bolt. |
Hytrel (polyester elastomer) |
Material possessing elasticity of rubber especially at room temperature to decomposition temperature. |
Abbreviation of production control number. They identify, among other things, optional equipment, variations specific to certain countries and running gear information. |
Abbreviation for repair group. |
Plastic (irreversible) deformation of car springs due to weight of vehicle. |
Offset of wheel plane to direction of travel. |
Difference between steering angle of inner and outer wheels during a turn. |
Angle between wheel plane and a plane vertical to road surface. It is positive when the top of the wheel leans outwards and negative when it leans inwards. |
Abbreviation for across flats. |
Widely used version of constant velocity joint with three rollers in the form of a star. |
|
|
|