Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Installing >
< Special tools, testers, measuring instruments and auxiliary items required
Golf Mk4
Vehicle electrics
Communication / Infotainment
Radio system "RCD 200” / moving_and_installing_radio_quot;rcd_200/">Removing and installing radio "RCD 200”
Removing
Removing
Removing
Before beginning dismantling work, perform the following steps:
–
Switch off ignition and all electrical consumers and remove ignition key.
–
Remove any CDs which may be in unit
→ Operating manual
.
Carry out procedure as follows:
–
Slide the radio release tools -T10057- into the slots in the radio unit
-arrows-
until they engage.
Top L - top and bottom on left
Top R - top and bottom on right
–
Pull radio unit out of installation slot in
-direction of arrow-
using grip rings of release tools.
–
Pull radio unit out of slot far enough to be able to reach connectors on back of radio unit.
–
Press connector lock together
-in direction of arrow-
.
–
Then swing locking bar up in
-direction of arrow-
and pull off connector.
–
Release connector
-arrow-
on aerial connection and pull it off.
–
Press lugs on radio unit in
-direction of arrow-
and pull release tools out from radio unit.
Vehicle electrics
Communication / Infotainment
Radio system "RCD 200” / moving_and_installing_radio_quot;rcd_200/">Removing and installing radio "RCD 200”
Removing
Installing >
< Special tools, testers, measuring instruments and auxiliary items required