2 - | Immobilizer reading coil 1 |
3 - | Warning lamp for side lights |
4 - | CAN data bus, screening for input signals |
9 - | External gong (e.g. for seat belt warning system) |
10 - | Fuel reserve warning (only certain countries) |
11 - | Vehicle stationary signal |
12 - | Air conditioning system shut-off |
13 - | Handbrake warning lamp |
14 - | Traction control system/vehicle stabilisation |
15 - | Fault warning lamp for electric accelerator mechanism |
16 - | Immobilizer, relay output |
17 - | Immobilizer reading coil 2 |
18 - | Oil temperature and oil level signal |
19 - | CAN data bus, high input signal |
20 - | CAN data bus, low input signal |
21 - | Signal for oil temperature warning (vehicles without oil level warning) |
23 - | MFI call-up button - top (display switches down) |
24 - | MFI call-up button - bottom (display switches up) |
25 - | MFI save switch - reset |
26 - | Ambient temperature sensor input signal |
27 - | CAN data bus, high output signal |
28 - | CAN data bus, low output signal |
29 - | CAN data bus, screening for output signals |
30 - | Output signal 2 from electronic speedometer |
31 - | Selector lever position display |
32 - | Fuel consumption signal |
|
|
|