volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing sliding sunroof adjustment regulator E139 > < Removing and installing light switch E1
Removing and installing headlight range control regulatorE102 with switches and instruments illumination regulatorE20
Removing and installing headlight range control regulator -E102- with switches and instruments illumination regulator -E20-
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
–  If necessary, use adhesive tape to mask dash panel around regulator.
   
–  Carefully lever switch housing out of installation frame using a flat-tip screwdriver.
–  Pull switch housing out of installation frame and unplug multi-pin connector.
Installing:
Install in reverse order of removal.
  N96-0213

Removing and installing sliding sunroof adjustment regulator E139 > < Removing and installing light switch E1