Switch off ignition and all electrical consumers and remove ignition key.
–
Remove screws -arrows- securing number plate light.
–
Remove lens with bulb from number plate light housing.
–
Push contact plate in direction of arrow and remove bulb.
Install in the reverse order of removal. When doing this, note the following:
Note
A small silver coloured anti-dazzle strip -arrow- is fitted in the number plate light lens. This must always be towards the bumper when installing the lens.
Removing number plate light
–
Switch off ignition and all electrical consumers and pull out ignition key.
–
Press locking tab -arrow- in direction of arrow using a suitable screwdriver and remove number plate light from bumper.
–
Release and separate connector -arrow-.
Installing number plate light
Install in the reverse order of removal. When doing this, note the following:
Note
A small silver coloured anti-dazzle strip -arrow- is fitted in the number plate light lens. This must always be towards the bumper when installing the lens.