Golf Mk5
Assembly overview - bonnet latch and release components |
1 - | Arrester |
q | Removing: |
– | Remove bolts -2- and remove latch hook. |
q | Adjusting: |
– | Adjustment is carried out by moving arrester to left or right in elongated holes. |
2 - | Bolt |
q | Qty. 3 |
q | 10 Nm |
3 - | Expanding nut |
q | Qty. 2 |
4 - | Bearing bracket |
5 - | Bowden cable |
q | Clipped into bearing bracket |
6 - | Bolt |
q | Qty. 2 |
q | 1.5 Nm |
7 - | Release lever |
q | Removing and installing → Chapter |
8 - | Bowden cable |
q | Clipped onto wheel housing and lock carrier. |
9 - | Bowden cable coupling |
q | Separating → Chapter |
10 - | Bonnet lock |
q | Removing and installing → Chapter |
q | Adjusting → Chapter |