volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Assembly overview - rear lid latch and release components > < Adjusting striker pin

Golf Mk5

Adjusting adjustment buffer
Adjusting adjustment buffer
  Note
Only the adjustment for the right adjustment buffer is described. The adjustment for the left adjustment buffer is similar.
   
–  Loosen clamping bolt -2- until it is visible in rubber buffer.
–  Now pull detent slide -1- out of adjustment buffer.
  N55-10100
–  Adjust detent slide to dimension -a = 12.5 mm-.
–  Close rear lid to detent position with light pressure at centre of lid.
  N55-0159
–  Open rear lid again.
–  Screw in adjustment buffer clamping screw -1- to a depth of dimension -a = 25 mm-.
–  Check setting.
  N55-0212

Assembly overview - rear lid latch and release components > < Adjusting striker pin