| Installation instructions for lettering and emblems |
Note | t
| Before removal, heat the lettering or the emblem with a hot air blower -V.A.G 1416-. |
| t
| Use only adhesive remover -D 002 000 10- to remove residual adhesive. |
| t
| Ensure that the adhesive surfaces are free of dust and grease. |
| t
| Bond lettering or emblem immediately after cleaning. |
| t
| Pull protective film off only directly prior to installation. |
| t
| The working temperature is approx. 21 °C. |
|
|
|
