volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing sliding gate

Golf Mk5

Removing
Removing
–  Remove glass panel of sliding/tilting sunroof → Chapter.
–  Remove carrier unit → Chapter.
–  Remove sunroof glass panel drive → Chapter
–  Remove guide plate → Chapter.
   
–  Detach water channels -1- carefully using a screwdriver at both sides on guide locating hook -2- in -direction of arrow- and remove water channels.
  N60-0117
–  Using a screwdriver, loosen clips -arrows- on end piece of upper part -1- from end piece lower part -2- and pull off end piece upper part.
  N60-10030
–  Slide rear guide lower part -1- in -direction of arrow- in guide rail -3-, until the locating hook guide locking mechanism -2- is released.
–  Pull out rear guide lower part -1- and locking hook guide -2- together in -direction of arrow- from guide rail -3- and remove.
  N60-10036

Installing > < Removing and installing sliding gate