Golf Mk5
Installing |
– | In the area of the positioning aids -1-, push the wiring harness in the rear channel of the cushion. |
– | Push the wiring harness in the area of -the arrows A and B- into the cushion recess. |
– | Set the sensor -3- positioning aid to the positioning aid of the cushion -2-. |
Caution
|
– | Fix the set sensor -1- with the right hand, pull the adhesive strip -2- off and attach the sensor to the cushion. |
– | Push the wiring harness, at the rear, into the cushion recess -arrow-. |
– | Connect the wiring harness to the vehicle electrics. |
|