volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing lower B-pillar trim

Golf Mk5

Removing
Removing
–  If vehicle is equipped with an interior monitor, switch off ignition.
–  Remove sill moulding (4-door) → Chapter.
   
–  Remove the two bolts -1- (4 Nm).
–  Release trim -3- from door seal beading.
–  Pull out trim, in area of guide -2-, from mountings in body.
–  If vehicle is equipped with interior monitoring system, disconnect wiring harness from sensor.
–  Pull out upper part of lower B-pillar trim.

   

Installing > < Removing and installing lower B-pillar trim