volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing brake pads/linings

Golf Mk5

Removing
Removing
Mark brake pads/linings when removing if they are to be reused. Fit in same position when installing, or braking will be uneven.
–  Remove wheels.
   
–  Disconnect connector -1- for brake pad wear indicator.
  N46-0263
–  Remove cover caps -arrows-.
  A46-0086
–  Unscrew both guide pins -arrows- and remove from brake caliper.
–  Remove brake caliper and secure with wire so that weight of brake caliper does not strain or damage brake hose.
–  Take brake pads out of brake caliper.
Cleaning:
  WARNING
Do not blow out brake system with compressed air; the resulting dust constitutes a health hazard!
–  Thoroughly clean brake carrier and contact surfaces for brake pads and remove corrosion.
–  Clean brake caliper.
Use only methylated spirits for cleaning the brake caliper housing.
  A46-0087

Installing > < Removing and installing brake pads/linings