volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Repairing rear brake CII 38 > < Removing

Golf Mk5

Installing
Installing
l  Piston is pressed back.
l  The brake pads are seated on the brake carrier.
–  Secure brake caliper to brake carrier with new self-locking bolts.
–  Screw brake line to brake caliper.
–  Bleed brake system → Chapter.
–  Hook in handbrake cable and secure on retainer with spring clip.
–  Adjusting handbrake → Chapter.
–  Fit wheels.
Specified torque of wheel bolts → Running gear, axles, steering; Rep. gr.44.
  Note
t  Firmly depress brake pedal several times with vehicle stationary so that the brake pads are properly seated in their normal operating position.
t  Check brake fluid level.
   
Specified torques: 
Hexagon bolt, brake caliper to brake carrier
t  Use new bolts.
35 Nm
Brake line to brake caliper14 Nm

   

Repairing rear brake CII 38 > < Removing