Volkswagen Workshop Service and Repair Manuals > Golf Mk5 > Heating, ventilation, air conditioning system | Auxiliary heater | Aux. heater/heater booster | Removing and installing auxiliary heater Thermo Top V | Removing ancillaries of auxiliary heater Thermo Top V | Removing and installing exhaust pipe for auxiliary heater

Removing and installing exhaust pipe for auxiliary heater

Short exhaust pipe

WARNING

Danger of burn injuries.

Parts of the exhaust system may be hot.

Before removing exhaust system, let it cool off.

–	Remove nut and bolt -1-. When installing, first tighten bolt (6 ±0.6 Nm).

Long exhaust pipe

–	Remove nuts and bolt -1-. When installing, first tighten bolt (6 ±0.6 Nm).

–	When installing exhaust system, first install this exhaust pipe.

Note

Observe drain hole -arrow-. It must be visible following installation and also serves as an installation marking.

–	Tighten bolts and nuts to 6 ±0.6 Nm and bolt -2- to 23 ±3.5 Nm. Tightening sequence of bolts and nuts is 14.