volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Checking ventilation > < Test procedure

Golf Mk5

Removing and installing
Removing and installing
Removing
–  Remove footwell trim on driver side → General body repairs, interior; Rep. gr.68.
   
–  Remove left footwell vent → Chapter.
  Note
If the lever -C- to temperature flap is positioned so that the upper bolt -A- is not accessible. Change the position of the temperature flap at the heater and fresh air controls. On vehicles with Climatronic, at the control and display unit (e.g. the setting „Hi“).
–  Disconnect battery → Electrical system; Rep. gr.27.
–  Remove bolts -A- from cover -B-.
  Caution
Danger of short circuit.
Disconnect battery before performing repair work.
  A87-0685
–  Remove nut -1- 9 ±1 Nm.
–  Release locking device of connector strip -arrow-.
  WARNING
Danger of burn injuries.
The auxiliary air heater element -Z35- may be hot.
Before removing auxiliary air heater element -Z35-, allow it to cool off.
–  Undo bolt -2- 1.4 Nm and pull auxiliary air heater element -Z35- out of blower box.
Installing
  Note
Ensure that the earth wire is in proper position.
Install in reverse order.
  N80-10205

Checking ventilation > < Test procedure