volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Emergency release of selector lever > < Adjusting multifunction switchF125

Golf Mk5

Adjustment prerequisites
Adjustment prerequisites
l  Selector lever cable is disconnected from selector shaft lever.
l  Selector shaft is set to „N“ position.
l  Securing bolts for multifunction switch -F125- have been loosened.
l  Selector shaft lever has been removed.
   
–  Place setting gauge on selector shaft -2- and turn multifunction switch -1- until setting gauge engages in lug on multifunction switch connector.
–  Secure setting gauge on selector shaft -2- with bolt -3-.
–  Tighten bolts -arrows- to 6 Nm.
–  Remove setting gauge.
–  Continue installation in reverse order of removal → Chapter.
  N38-10000

Emergency release of selector lever > < Adjusting multifunction switchF125