| Checking selector lever cable |
| To check ease of movement of selector lever cable, it must be removed from the gearbox and the free end must be placed so that it does not bump against anything. |
| The selector lever must be moved and then the cable must be reattached to the gearbox. |
| Then the selector lever cable must be adjusted → Chapter. |
| Do not lubricate the cable connections. |
| –
| Move selector lever to position „P“ position. |
| –
| Remove cable from lever on gearbox. |
| –
| Move selector lever repeatedly from „P“ to „S“ and back to „P“. |
| l
| Selector lever must move easily |
| –
| Install cable with new securing clip and adjusting screw loosened. |
|
|
|
