volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Assembly overview - hydraulic system > < Removing

Golf Mk5

Installing
Installing
Install in the reverse order of removal, observing the following:
  Note
t  Renew hose clips.
t  Allocate all components according to → Electronic parts catalogue “ETKA”.
If the pipe/hose line or plastic line was removed:
   
–  Push pipe/hose line or plastic line -1- with seal -2- onto connection of master cylinder -4- until securing clip -3- engages audibly.
–  Test line by tugging on it.
–  After removing hose clamp -3094-, return supply hose to its original position, if necessary.
–  Bleed clutch system → Chapter.
All vehicles
–  Install battery tray and battery → Electrical system; Rep. Gr.27.
–  If removed, install complete air filter housing → Rep. Gr.23 or → Rep. Gr.24.
–  Reconnect battery and perform work required after connecting battery → Electrical system; Rep. Gr.27.
  A30-0156

Assembly overview - hydraulic system > < Removing