volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing clutch position sender G476 > < Removing

Golf Mk5

Installing
Installing
l  Move clutch pedal to rest position at stop.
   
–  Attach retainer -2- to master cylinder operating rod -1-.
  A30-0120
–  Insert spacer -A- between clutch pedal and stop and press clutch pedal to spacer.
t  Length of spacer = about 40 mm (e.g. 1/2" socket).
–  Engage master cylinder in mounting bracket -arrow 1- and -arrow 2-.
  A30-0121
–  Press master cylinder operating rod -1- in direction of arrow until retainer -2- engages audibly in clutch pedal.
–  Install mounting bracket → Chapter.
  A30-0122

Removing and installing clutch position sender G476 > < Removing