volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing slave cylinder with release bearing > < Assembly overview

Golf Mk5

Removing pipe/hose line or plastic line and bleeder from and installing on slave cylinder
Removing pipe/hose line or plastic line and bleeder from and installing on slave cylinder
   
Removing pipe/hose line or plastic line from and installing on bleeder
–  To remove, release securing clip -2- with a screwdriver and pull pipe/hose line or plastic line -4- off bleeder -1-.
–  To install pipe/hose line or plastic line, push onto bleeder connection with O-ring -3- until securing clip engages audibly.
–  Test line by tugging on it.
  A30-0136
Removing bleeder from and installing on slave cylinder
–  To remove, release securing clip -2- with a screwdriver and pull bleeder -4- off slave cylinder -1-.
–  To install, check O-ring -3- on slave cylinder. Press bleeder onto slave cylinder connection until securing clip engages audibly.
–  Check by pulling on bleeder.
–  Bleed clutch system, Golf → Chapter.
–  Bleed clutch system, Passat → Chapter.
  A30-0137

Removing and installing slave cylinder with release bearing > < Assembly overview