–
| Set up measuring tools. Put washers with a total thickness of 8 mm on bolt -arrow- for securing assembly device -VW 792- to clutch housing. |
–
| Set dial gauge (3 mm measuring range) to “0” with 1 mm preload. |
–
| Loosen clutch housing/gearbox housing securing bolts diagonally until the bolts release the gearbox housing or output shaft. |
–
| Read and note value on dial gauge (example: 0.25 mm). |
Note t
| If dial gauge indicates no value when clutch housing/gearbox housing securing bolts are loosened, install a 1.95 mm shim or, if necessary, a 2.20 mm shim. |
|
|
|