Golf Mk5
| Assembly overview - selector cables (cable support bracket and relay lever made from plastic) |
Note| t | Lubricate bearing positions and sliding surfaces. |
| t | Allocate grease using → Electronic parts catalogue (ETKA). |
| t | Do not kink selector cables. |
| 1 - | Selector shaft with selector shaft cover |
| 2 - | Shoe |
| 3 - | Relay lever |
| q | Made of plastic |
| q | Allocation → Electronic parts catalogue |
| q | Installation position → Fig. |
| q | After installing, adjust selector mechanism → Chapter |
| q | Remove and install plastic relay lever together with cable end-piece → Chapter |
| 4 - | Cable end-piece |
| q | After installing, adjust selector mechanism → Chapter |
| q | For gate selector cable to relay lever |
| q | Do not interchange; cable end-pieces for gate selector cable to relay lever and gear selector cable to gearbox selector lever are different |
| q | Remove from relay lever → Chapter |
| q | Press onto relay lever → Chapter |
| q | Allocation → Fig. |
| 5 - | Cable end-piece |
| q | After installing, adjust selector mechanism → Chapter |
| q | For gear selector cable to gearbox selector lever |
| q | Do not interchange; cable end-pieces for gate selector cable to relay lever and gear selector cable to gearbox selector lever are different |
| q | Allocation → Fig. |
| 6 - | Securing clip |
| q | Always renew |
| 7 - | Securing clip |
| q | Always renew |
| q | Do not damage cables when removing |
| 8 - | Gate selector cable |
| q | Connect to cable end-piece → Item |
| q | Installation position → Chapter |
| 9 - | Gear selector cable |
| q | Connect to cable end-piece → Item |
| q | Installation position → Chapter |
| 10 - | Selector housing |
| 11 - | Securing clip |
| q | Always renew |
| q | Do not damage cables when removing |
| 12 - | Cable support bracket |
| q | Made of plastic |
| 13 - | Hexagon bolt, 20 Nm |
| q | Qty. 3 |
| q | For cable support bracket |
| 14 - | Grommet |
| q | Qty. 3 |
| q | Cable support bracket mounting on gearbox |
| 15 - | Spacer |
| q | Qty. 3 |
| 16 - | Hexagon nut → Item |
| 17 - | Gearbox selector lever |
| q | Installing → Fig. |
| q | Installation position → Fig. |
| q | After installing, adjust selector mechanism → Chapter |
| 18 - | Seal |
| q | Renewing → Item |
| 19 - | Clip |
| q | ⇒ Relay lever with clip → Fig. |
