volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing slave cylinder > < Assembly overview - hydraulics (LHD)
Assembly overview - hydraulics (RHD)
   
Assembly overview - hydraulics (RHD)
1 - Brake fluid reservoir
2 - Seal
q   For plastic supply hose
q   The seals must be located in supply hose
3 - Supply hose
q   Made of plastic
q   May be made of rubber → Item
4 - Master cylinder
q   Removing and installing → Chapter
5 - Clip
q   Pull clip out to stop to remove or install pipe
6 - Seal / O-ring
q   Pull onto line connection
q   Insert with brake fluid
q   Seals/O-rings are adapted to configuration of line connection → Fig.
q   Allocation → Electronic parts catalogue “ETKA”
7 - Retainer
q   To remove and install, separate master cylinder from clutch pedal → Chapter
8 - Clutch pedal
q   Removing and installing → Chapter
9 - Hexagon nut, → Item
10 - Retainer
q   Secured to body
11 - Pipe line
q   Pipe and hose/pipe line → Item may be in one piece
q   Allocation → Electronic parts catalogue “ETKA”
q   To remove, remove battery and battery tray → Electrical system; Rep. Gr.27.
12 - Seal / O-ring
q   Pull onto line connection
q   Insert with brake fluid
q   Seals/O-rings are adapted to configuration of line connection → Fig.
q   Allocation → Electronic parts catalogue “ETKA”
13 - Pipe/hose line
q   Pipe → Item and hose/pipe line may be in one piece
q   Allocation → Electronic parts catalogue “ETKA”
q   To remove, remove battery and battery tray → Electrical system; Rep. Gr.27.
14 - Retainer
q   Secured to retainer for ABS/EDL
15 - Retainer
q   For ABS/EDL
16 - Seal / O-ring
q   Pull onto line connection
q   Insert with brake fluid
q   Seals/O-rings are adapted to configuration of line connection → Fig.
q   Allocation → Electronic parts catalogue “ETKA”
17 - Clip
q   Pull out clip to stop to remove and install pipe/hose line
18 - Slave cylinder
q   Removing and installing → Chapter
19 - Hexagon bolt, 20 Nm
20 - Bleeder valve
q   Bleeding clutch system → Chapter
21 - Dust cap
22 - Gearbox
23 - Retainer
24 - Hexagon bolt, 20 Nm

   

Removing and installing slave cylinder > < Assembly overview - hydraulics (LHD)