Volkswagen Workshop Service and Repair Manuals

Removing –  Push driver seat as far back as possible and put steering wheel in highest position. –  Remove trim and cover below trim on driver side → Rep. Gr.68. The crash bar -1- in front of clutch pedal -2- may be secured in different ways. Attachment with 2 bolts

–  Remove crash bar -1- (2 bolts). Attachment with 1 bolt

–  Remove crash bar -1- (1 bolt -2-).

If fitted, remove damping -arrow- from lower area of clutch pedal mounting bracket.

–  To do this, remove lock washers -A- for damping. –  Pull off damping.

–  Push damping upwards in area of upper securing nut -1- above clutch pedal -A- in -direction of arrow-.

–  Unbolt clutch pedal -1- from mounting bracket -3- by removing nut -2- and pulling out bolt -5-.   Note The clutch pedal remains hooked to operating rod of master cylinder. –  Swing clutch pedal down slightly and remove over-centre spring -4- from mounting bracket.