Volkswagen Workshop Service and Repair Manuals

Torque settings

Gearbox to engine

Item	Bolt	Quantity	Nm
1	M 12 x 65	2	80
2	M 12 x 150 t  Additionally, starter to gearbox	1	80
3	M 12 x 165 t  Additionally, starter to gearbox	1	80
4	M 10 x 50	3	40
5	M 12 x 85	1	80
6	M 6 x 8 t  Small cover plate for flywheel	1	10

Item -A- dowel sleeves for centring

Gearbox bracket to gearbox –  Renew bolts. –  Screw in all bolts hand-tight. –  Tighten bolts to specified torque.

Bolts -arrows-

40 Nm + 90°

Gearbox mounting to body –  Renew bolts. –  Screw in all bolts hand-tight. –  Tighten bolts to specified torque.

Bolts -arrows-

60 Nm + 90°

Install gearbox carrier. When installing bevel box carrier, observe following sequence: –  Screw in bolts -arrows 1- hand-tight. –  Tighten bolts -arrows 2- to 40 Nm. –  Tighten bolts -arrows 1- to 40 Nm.

Gearbox support to gearbox bracket and gearbox –  Renew bolts. –  Screw in all bolts hand-tight. –  Tighten bolts to specified torque.

Bolts -arrows-

20 Nm + 90°