volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing over-centre spring > < Overview - clutch actuation
Assembly overview, pedal cluster with clutch position senderG476 - Touran from 06.03, Passat, Eos, Scirocco, Golf, and Golf Plus
   
Assembly overview, pedal cluster with clutch position sender -G476- - Touran from 06.03, Passat, Eos, Scirocco, Golf, and Golf Plus
1 - Bulkhead
q   With support for mounting bracket
2 - Seal
q   Always renew
q   Between mounting bracket and bulkhead
q   Self-adhesive
q   Bond to mounting bracket
3 - Mounting bracket
q   For mounting clutch pedal
q   Is provided with damping in some equipment variants → Fig.
q   Removing and installing, Touran → Chapter
q   Removing and installing, Golf 2004 ► → Chapter
q   Removing and installing, Golf 2009 ► left-hand drive and Scirocco → Chapter
q   Removing and installing, Golf 2009 ► right-hand drive and Golf Plus right-hand drive → Chapter
q   Removing and installing, Golf Plus left-hand drive → Chapter
q   Removing and installing, Passat → Chapter
q   Removing and installing, Eos → Chapter
4 - Bolt
5 - Over-centre spring
q   Removing and installing, Touran from 06.03 → Chapter
q   Removing and installing, Golf 2004 ► → Chapter
q   Removing and installing, Golf 2009 ► left-hand drive and Scirocco → Chapter
q   Removing and installing, Golf 2009 ► right-hand drive → Chapter
q   Removing and installing, Golf Plus → Chapter
q   Removing and installing, Passat → Chapter
q   Removing and installing, Eos → Chapter
6 - Bearing bush
7 - Pivot pin
8 - Clutch pedal
q   Removing and installing, Touran → Chapter
q   Removing and installing, Golf 2004 ► → Chapter
q   Removing and installing, Golf 2009 ► left-hand drive and Scirocco → Chapter
q   Removing and installing, Golf 2009 ► right-hand drive → Chapter
q   Removing and installing, Golf Plus → Chapter
q   Removing and installing, Passat → Chapter
q   Removing and installing, Eos → Chapter
9 - Support
q   To remove and install, separate master cylinder from clutch pedal (⇒ Removing and installing clutch pedal)
q   Touran → Chapter
q   Golf 2004 ► → Chapter
q   Golf 2009 ► left-hand drive and Scirocco → Chapter
q   Golf 2009 ► right-hand drive → Chapter
q   Golf Plus → Chapter
q   Passat → Chapter
q   Eos → Chapter
10 - Seal
q   Always renew
q   Between master cylinder and mounting bracket
11 - Master cylinder
q   Touran with clutch position sender -G476- (from 06.03), removing and installing after removal of mounting bracket → Chapter
q   Passat, Eos, Scirocco, Golf, and Golf Plus, removing and installing after removal of mounting bracket → Chapter
12 - Clutch position sender -G476-
q   Allocation → Electronic parts catalogue „ETKA“
q   Removing and installing, Touran from 06.03, Passat, Eos, Scirocco, Golf and Golf Plus → Chapter
q   Can be checked in „guided fault finding“ of vehicle diagnosis, testing and information system -VAS 5051-
q   The clutch position sender -G476- is identified as clutch pedal switch -F36- in „guided fault finding“
13 - Clip
q   Pull out clip to stop to remove and install pipe/hose line
14 - Supply hose
q   Rubber
q   From 12. 05, plastic → Fig.
q   Golf 2009 ►, Golf Plus 2009 ► and Scirocco made from plastic → Fig.
15 - Self-locking hexagon nut, 25 Nm
q   Qty. 3
q   For mounting bracket to bulkhead
q   Always renew
16 - Hexagon nut, 25 Nm
q   Always renew
17 - Stop
q   For clutch pedal

   
Mounting bracket with damping -arrows-
  N30-10195

Removing and installing over-centre spring > < Overview - clutch actuation