Checking selector lever cable |
To check ease of movement of selector lever cable, it must be removed from the gearbox and the free end must be placed so that it does not bump against anything. |
The selector lever must be moved and then the cable must be reattached to the gearbox. |
Then the selector lever cable must be adjusted → Chapter. |
Do not grease the connections of the cable! |
–
| Move selector lever to position “P” position. |
–
| Remove cable from lever on gearbox. |
–
| Move selector lever repeatedly from “P” to “S” and back to “P”. |
l
| Selector lever must move easily. |
–
| Reinstall cable with “loosened” adjustment screw. |
|
|
|