volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing all-wheel drive control unitJ492 > < Removing and installing all-wheel drive control unitJ492

Golf Mk5

Removing all-wheel drive control unitJ492
Removing all-wheel drive control unit -J492-
  Note
   
When control unit -1- is removed, cover -2- and dished spring -5- are removed together. Pressure sensor -4- and valve -3- are removed separately.
–  Switch off ignition.
  N39-10093
–  Separate connectors -1- and -2- on top of control unit.
–  Place drip tray under final drive.
  N39-10090
–  Remove bolts -arrows-.
Ensure that no parts fall down when removing control unit.
–  Carefully remove control unit -A-.
  A39-10049
–  Carefully grasp coupling opening control valve -N373--A- on metal housing -arrow- using pliers and pull out.
–  Pull out pressure sensor -B-.
  A39-10051
–  Remove seal for coupling opening control valve -N373--arrow- from housing.
  N39-10096

Installing all-wheel drive control unitJ492 > < Removing and installing all-wheel drive control unitJ492