| –
| Attach lifting tackle -2024 A- as shown and raise engine out of engine and gearbox jack -V.A.G 1202 A- using workshop crane -V.A.G 1383 A-. |
| Belt pulley end: 2nd hole in hook rail at position 1 |
| Flywheel end: 4th hole in hook rail at position 8 |
WARNING | The hooks and locating pins must be secured with locking pins. |
|
Note | t
| The holes marked with 1 … 4 of the support bar point to the belt pulley. |
| t
| The holes in the hook rails are counted up from the hook. |
| –
| Secure engine on support clamp -VW 540- using engine and gearbox jack -VW 313-. |
|
|
|
