volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing camshaft oil seal

Golf Mk5

Removing
Removing
–  Remove toothed belt. → Chapter
–  Remove camshaft toothed belt pulley and hub → Chapter, Removing and installing camshaft.
–  Unscrew inner part of oil seal extractor -3240- two turns (approx. 3 mm) out of outer part and lock with knurled screw.
   
–  Lubricate threaded head of oil seal extractor -3240-, place it in position and exerting firm pressure, screw it as far as possible into oil seal.
–  Loosen knurled screw and turn inner part against camshaft until oil seal is pulled out.
  N15-0273

Installing > < Removing and installing camshaft oil seal