volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Crankshaft > < F - Re-pressing sender wheel

Golf Mk5

Removing and installing engine speed senderG28
Removing and installing engine speed sender -G28-
Special tools and workshop equipment required
   
t  Hexagon key extension, 4 mm -T10370-
t  Or commercially available ball-ended hexagon key socket, 5 mm
  Note
Two different bolts are installed, check which tool is to be used.
–  Remove noise insulation → General body repairs, exterior; Rep. gr.50.
–  Clamp off coolant hoses at engine oil cooler using hose clip and pull off hoses.
–  Remove oil filter bracket.
  W00-10582
–  Remove securing bolt -arrow- and pull out engine speed sender -G28-.
Installation is performed in the reverse order, observing the following: specified torque for engine speed sender -G28- securing bolt: 5 Nm.
  N13-10048

Crankshaft > < F - Re-pressing sender wheel