Golf Mk5
Assembly overview - fuel tank |
1 - | Cap |
2 - | 1.5 Nm |
3 - | Earth connection |
q | Check for secure seating. |
4 - | 10 Nm |
5 - | Cable guide |
6 - | Fuel tank |
q | When removing, support using engine and gearbox jack -V.A.G 1383/A-. |
q | Removing and installing → Chapter |
7 - | 25 Nm |
q | Renew. |
8 - | Clamping washer |
9 - | Securing strap |
q | Note installation position. |
10 - | Heat shield |
q | For fuel tank. |
11 - | Seal |
q | Renew if damaged. |
q | Moisten with fuel when installing |
12 - | Fuel delivery unit |
q | With fuel gauge sender (G). |
q | Note installation position of flange on fuel tank → Fig.. |
q | Removing and installing → Chapter |
q | Checking fuel pump → Chapter. |
q | Removing and installing fuel gauge sender → Chapter. |
13 - | Locking ring |
q | Remove and install using wrench -T10202-. |
q | Specified torque: 110 Nm |
14 - | Supply line |
q | To fuel filter |
q | Clipped onto fuel tank. |
q | Check for secure seating. |
q | Black |
q | To pull off flange, press release button on connecting piece. |
15 - | Return line |
q | From fuel cooler |
q | Blue or with blue marking. |
q | Clipped onto fuel tank. |
q | Check for secure seating. |
q | To pull off flange, press release button on connecting piece. |
16 - | Tank flap unit |
q | Removing and installing → General body repairs, exterior; Rep. gr.55. |