| When working on the turbocharger, pay careful attention to the following rules of cleanliness: |
| t
| Thoroughly clean all unions and the adjacent areas before disconnecting. |
| t
| Place parts that have been removed on a clean surface and cover them over. Do not use fluffy cloths! |
| t
| Carefully cover or seal open components if repairs cannot be carried out immediately. |
| t
| Only install clean components: replacement parts should only be unpacked immediately prior to installation. Do not use parts that have been stored loose (e.g. in tool boxes etc.). |
| t
| Existing transport and protective packaging and sealing caps must only be removed immediately prior to installation. |
| t
| When making repairs, remove oil from connection and hose ends. |
| t
| When the system is open: Do not work with compressed air if this can be avoided. Do not move vehicle unless absolutely necessary. |
|
|
|
