Golf Mk5
| Assembly overview - fuel tank |
| 1 - | Supply line |
| q | Black |
| q | Check for secure seating. |
| 2 - | Return line |
| q | Blue |
| q | Check for secure seating. |
| 3 - | Seal |
| q | Renew if damaged. |
| q | When installing, insert seal dry into fuel tank opening. |
| q | Moisten with fuel only when installing flange. |
| 4 - | Fuel delivery unit |
| q | Removing and installing → Chapter. |
| q | Checking fuel pump → Chapter. |
| q | Note installation position on fuel tank → Fig.. |
| q | With fuel gauge sender -G-. |
| q | Removing and installing fuel gauge sender → Chapter |
| 5 - | Locking ring, 110 Nm |
| q | Check for secure seating. |
| q | Remove and install using wrench -T10202-. |
| 6 - | Tank flap unit |
| q | With rubber cup. |
| q | Removing and installing → General body repairs, exterior; Rep. Gr.55. |
| 7 - | Cap |
| q | Renew if damaged. |
| 8 - | Securing bolt |
| q | Tighten to 1.5 Nm |
| 9 - | Earth connection |
| q | Check for secure seating. |
| 10 - | 10 Nm |
| 11 - | Suction-jet pump |
| q | Clipped onto fuel gauge sender 2 -G169- |
| q | Removing and installing → Chapter. |
| 12 - | Fuel gauge sender 2 -G169- |
| 13 - | Fuel tank |
| q | When removing, support using engine and gearbox jack -V.A.G 1383 A- |
| q | Removing and installing → Chapter. |
| 14 - | Securing strap |
| q | Note installation position. |
| 15 - | 25 Nm |
| q | Renew |
| 16 - | Heat shield |
| q | Riveted to exhaust pipe mounting |
Note
