volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Tandem pump > < Assembly overview - accelerator mechanism

Golf Mk5

Removing and installing accelerator module
Removing and installing accelerator module
Special tools and workshop equipment required
t  Release tool -T 10269- (for right-hand drive vehicles -T10297-).
   
t  Torque wrench (5…50 Nm) -V.A.G 1331-
Removing
– 
–  Lever off cap → Item using a screwdriver.
–  Remove securing bolt beneath it.
Golf, Golf Plus and Passat:
  W00-0427
–  To remove accelerator module, push release tool -T 10238- (for right-hand drive vehicles -T10240-) into opening provided to stop.
Touran:
  N20-10056
–  To remove accelerator module, push release tool -T 10269- (for right-hand drive vehicles -T10297-) into opening provided to stop.
Continuation for all vehicle types:
–  Pull connector off accelerator module.
–  Pull wiring guide off accelerator pedal module.
–  Pull out accelerator module vertically.
Installing
Installation is carried out in the reverse order. When installing, note the following:
–  Attach connector and wiring guide to accelerator module.
–  Press accelerator module onto securing pins.
–  Insert centring pin into hole in vehicle floor.
–  Secure accelerator module with securing bolt -3-. Specified torque: 9 Nm
–  Attach cap.
–  Install steering column cover.
  N20-10152

Tandem pump > < Assembly overview - accelerator mechanism